FM,CE Approve Polyethylene Corrosive Cabinets (Combinable)

Installation Instruction:

1, Stitching left and right The left and right splicing first needs to arrange the door of the two cabinets to open the direction is opposite; This point needs to be communicated with the factory in advance when purchasing again, so as to avoid opening the door to interfere with the use of internal goods in the actual use process; Then assemble the handle on the left and right two cabinets; Can be added at the back of the metal connecting piece, so that the connection is more solid, will not shake;
2, Splice top and bottom Up and down splices should prepare accessories above all, place the alignment of cabinet body up and down first, and then fix the connecting piece up and down; Note that all connectors are located on the back of the cabinet; After positioning, punching and fixing the fixed parts on the wall according to the size of the attached drawing, screw the M8 bolt into the top of the top cabinet and place the cabinet against the wall, and lift the top into the fixed parts on the wall; Screw in the M8 bolt at the bottom and fix the ground connection support; Punched and fixed in the ground; M8 bolts are used for cabinet connection and M10 anchor bolts are used for wall floor connection. Pay attention to the difference.
Note: when splice up and down, the upper, middle and lower three connectors must be fixed, and the cabinet can only be used normally after the installation and connection between the cabinet and the wall, floor and each other are confirmed in place. Otherwise there is a risk of dumping.